The sight of a Marlboro Red exterior of that gleaming coupé during golden hour strikes you. It is parked outside the mall, next to your ride, and the reflection of the sun on the perfect curves and the menacing look call you. You walk some steps towards it, get closer, take a walk around it, and notice a myriad of bubbles in the back window. Suddenly, you lose interest; it no longer is a dream ride, but just another car with a lousy tint job.
Yes, even the most beautiful, state-of-the-art, engineering wonder can suffer from a bad tint job. You must have seen it countless times: amazing rides ruined with cheap tinting.
Don’t make that mistake yourself, read on and find out what sets a bad and a good tinting job apart, and why it is important to invest once and enjoy for years.
Before thinking of how much does window tinting cost, think about getting it right.
It’s all in the details
Let’s begin by saying that unless you see an embarrassing work with a million bubbles, most of what sets a good tinting and a bad tinting job apart are the details. Indeed, small things like light leaks, irregular lines, and tiny bubbles that distort your vision are all the result of poor installation and materials.
Moreover, a scruffy job done in a hurry by a careless person will not look perfect on day one and will continue to deteriorate as time goes by.
First, you should always check that the company doing the job creates a computerized template of your window. If they don´t, they will improvise during installation and the result will very likely be full of uneven lines and gaps.
A clean job over a clean window
Second, you should always make sure that the windows are thoroughly cleaned before the tinting job. Otherwise, any debris or dirt that was beneath the layer can cause the adhesive to fail in the long run. Furthermore, tiny bubbles can form with those particles in time and distort your vision.
Sorry, Jimi, sorry Prince
I want to apologize to Jimi and Prince because although purple is great for rock stars and arena anthems, you don´t want it on your windows. If the tint job turns purple with time, the reason is not that you have been listening to those records over and over, but because it was done using cheap material that decolorized over time.
All material fades over time. Good material, like Huper Optik, 3M, and such, will fade within 4%, which is not perceived by the human eye.
The sad story of the defroster bars & the bubbles
Once upon a time, a careless worker did a tint job on the back window of a sports car. He was in a hurry and couldn’t spend the needed time firmly pressing the material against each defroster bar. Time went by, and one morning, the first bubble appeared. Within a week, the work had to be done again.
If the professionals working on your car don’t take the extra time and effort to do it right, your car will end up like the car in the story above. A few extra bucks can save you from redoing the entire window.
More effective doesn’t necessarily mean darker
Although it is a rule of thumb to think that the darker the tint, the more effective, it is not quite accurate. Indeed, the best materials you can use on your car (Huper Optik, 3M) can give you amazing results with very clear colors.
To check this, stand in the sun, offer one hand directly to sunlight and place the other under the tinted window. You should be able to tell the difference.
Mind the dotted line
Many cars have dotted lines on the far margins of their windows. A poorly-done tint job will not care about their texture and just place the material in place as if it didn’t exist. The adhesive will not work properly over the dots and the result will be an ugly-looking zig-zag line over them.
Cheap today, expensive in the long run
Why did we expose all the above reasons? Because before you go checking for how much does window tinting cost in your city, you should consider the pros and cons of going for the cheapest option.
On one hand, you’ll be saving money upfront but on the other hand, you’ll have to redo the job sooner than if you would invest in a higher-quality window tint. The materials will be better and the attention to detail and craftsmanship will surely make a difference.
Just think that you will not only have to spend twice on the tinting but also move around without your car while it is at the shop. What might seem cheap and convenient today, might cost you more time and money in the long run.
Huper Optik is the answer
A great way to make sure that your car will be tinted nice and clean for a long time is using Huper Optik. This is German technology made in the USA that comes from blending two approaches: tint and reflective material.
The company created a new composition for the film called nano-ceramic. This new material can deflect heat and also retain the cool, dark color for longer. Just to tell you something about nano-ceramic technology, it is what NASA chose to install on the shuttles to deflect the heat when entering back to Earth. If they can handle that, they can handle the UV lights on your ride.
Don’t just take my word for it; see it in action on this jaw-dropping Porsche 911 Carrera here.
In conclusion, invest wisely and live happier
Whether you are doing it on your car, your home, or your business, tinting the windows is a great way of staying cool in the summer spending less. Indeed, deflecting UV light will allow you to spend less on air conditioning while you drive, live, and work fresher and happier.
Invest wisely and make the most out of your money with top-notch materials and skilled professionals. If you are looking for window tinting Lakewood, don’t hesitate and contact Extreme Autoworks, they are Huper Optik’s premier authorized dealer in Colorado.